Figure 321 Configuration > Object > Certificate > My Certificates > Import
The following table describes the labels in this screen.
Table 224 Configuration > Object > Certificate > My Certificates > Import
LABEL
File Path
Browse
Password
OK
Cancel
44.3 The Trusted Certificates Screen
Click Configuration > Object > Certificate > Trusted Certificates to open the Trusted
Certificates screen. This screen displays a summary list of certificates that you have set the UAG
to accept as trusted. The UAG also accepts any valid certificate signed by a certificate on this list as
being trustworthy; thus you do not need to import any certificate that is signed by one of these
certificates.
Chapter 44 Certificates
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse to find it.
You cannot import a certificate with the same name as a certificate that is already in the UAG.
Click Browse to find the certificate file you want to upload.
This field only applies when you import a binary PKCS#12 format file. Type the file's password
that was created when the PKCS #12 file was exported.
Click OK to save the certificate on the UAG.
Click Cancel to quit and return to the My Certificates screen.
UAG Series User's Guide
477