ZyXEL Communications UAG5100 User Manual page 108

Figure 75 Monitor > System Status > Ethernet Neighbor
The following table describes the labels in this screen.
Table 34 Monitor > System Status > Ethernet Neighbor
LABEL DESCRIPTION
Local Port This field displays the port of the UAG, on which the neighboring device is discovered.
(Description)
For UAGs that support Port Role, if ports 3 to 4 are grouped together and there is a
connection to P4 only, the UAG will display P3 as the first interface port number (even
though there is no connection to that port).
Model Name This field displays the model name of the discovered device.
System Name This field displays the system name of the discovered device.
Firmware Version This field displays the firmware version of the discovered device.
Port (Description) This field displays the first internal port on the discovered device.
Internal is an interface type displayed in the Network > Interface > Ethernet > Edit
screen. For example, if P1 and P2 are WAN, P3 to P4 are LAN and P5 is DMZ, then UAG
will display P3 as the first internal interface port number.
For UAGs that support Port Role, if ports 3 to 4 are grouped together and there is a
connection to P4 only, the UAG will display P3 as the first internal interface port number
(even though there is no connection to that port).
IP Address This field displays the IP address of the discovered device.
MAC This field displays the MAC address of the discovered device.
Refresh Click this button to update the information in the screen.
Chapter 7 Monitor
UAG Series User's Guide
108