Add/Edit Application Patrol Profile Rule Application - ZyXEL Communications UAG5100 User Manual

Table 168 Configuration > UTM Profile > App Patrol > Profile > Add/Edit (continued)
LABEL
Log
OK
Cancel

32.2.2 Add/Edit Application Patrol Profile Rule Application

Click Add or Edit under Profile Management in the previous screen to display the following
screen.
Figure 260 Configuration > UTM Profile > App Patrol > Profile > Add/Edit Rule > Add/Edit
Application
The following table describes the labels in this screen.
Table 169 Configuration > UTM Profile > App Patrol > Profile > Add/Edit Rule > Add/Edit
Application
LABEL
General Settings
Application
Action
Log
OK
Cancel
Chapter 32 Application Patrol
DESCRIPTION
Select whether to have the UAG generate a log (log), log and alert (log alert) or
neither (no) by default when traffic matches a signature in this category.
Click OK to save your settings to the UAG, complete the profile and return to the
profile summary page.
Click Cancel to return to the profile summary page without saving any changes.
DESCRIPTION
Select an application to apply the policy.
You must have configured an application object in the Configuration > Object >
Application screen.
Select the default action for all signatures in this category.
forward - the UAG routes packets that matches these signatures.
Drop - the UAG silently drops packets that matches these signatures without
notification.
Reject - the UAG drops packets that matches these signatures and sends notification.
Select whether to have the UAG generate a log (log), log and alert (log alert) or
neither (no) by default when traffic matches a signature in this category.
Click OK to save your settings to the UAG.
Click Cancel to return to the profile summary page without saving any changes.
UAG Series User's Guide
380