Log Settings Screens - ZyXEL Communications UAG5100 User Manual

The following table describes the labels in this screen.
Table 255 Configuration > Log & Report > Email Daily Report
LABEL
Enable Email
Daily Report
Mail Server
Mail Server Port
TLS Security
Authenticate
Server
Mail Subject
Append
system name
Append date
time
Mail From
Mail To
SMTP
Authentication
User Name
Password
Retype to
Confirm
Send Report Now
Schedule
Time For Sending
Report
Report Items
Reset All
Counters
Apply
Reset

47.3 Log Settings Screens

The Log Settings screens control log messages and alerts. A log message stores the information
for viewing or regular e-mailing later, and an alert is e-mailed immediately. Usually, alerts are used
for events that require more serious attention, such as system errors and attacks.
Chapter 47 Log and Report
DESCRIPTION
Select this to send reports by e-mail every day.
Type the name or IP address of the outgoing SMTP server.
Enter the same port number here as is on the mail server for mail traffic.
Select this option to use Transport Layer Security (TLS) if you want encrypted
communications between the mail server and the UAG.
If you choose TLS Security, you may also select this to have the UAG authenticate the
mail server in the TLS handshake.
Type the subject line for the outgoing e-mail. Select Append system name to add the
UAG's system name to the subject. Select Append date time to add the UAG's system
date and time to the subject.
Select Append system name to add the UAG's system name to the subject.
Select Append date time to add the UAG's system date and time to the subject.
Type the e-mail address from which the outgoing e-mail is delivered. This address is used
in replies.
Type the e-mail address (or addresses) to which the outgoing e-mail is delivered.
Select this check box if it is necessary to provide a user name and password to the SMTP
server.
This box is effective when you select the SMTP Authentication check box. Type the user
name to provide to the SMTP server when the log is e-mailed.
This box is effective when you select the SMTP Authentication check box. Type the
password to provide to the SMTP server when the log is e-mailed.
Retype your new password for confirmation.
Click this button to have the UAG send the daily e-mail report immediately.
Select the time of day (hours and minutes) when the log is e-mailed. Use 24-hour
notation.
Select the information to include in the report.
Select Reset counters after sending report successfully if you only want to see
statistics for a 24 hour period.
Click this to discard all report data and start all of the counters over at zero.
Click Apply to save your changes back to the UAG.
Click Reset to return the screen to its last-saved settings.
UAG Series User's Guide
536