The Billing Profile Screen - ZyXEL Communications UAG5100 User Manual

26.3 The Billing Profile Screen

Use this screen to configure the billing profiles that defines the maximum Internet access time and
charge per time unit. Click Configuration > Billing > Billing Profile to open the following screen.
Figure 219 Configuration > Billing > Billing Profile
The following table describes the labels in this screen.
Table 138 Configuration > Billing > Billing Profile
LABEL
Account
Generator
Settings
Button A ~ C
Preview
Billing Profile
Add
Edit
Remove
Activate
Inactivate
#
Status
Name
Chapter 26 Billing
DESCRIPTION
Select a billing profile for each button of the web-based account generator. The buttons
correspond to the buttons on a connected statement printer.
Click this button to open the Account Generator screen, where you can generate a
dynamic guest account and print the account information using a statement printer
connected to the UAG (see
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
This field is a sequential value, and it is not associated with a specific entry.
This icon is lit when the entry is active and dimmed when the entry is inactive.
This field displays the descriptive profile name for this entry.
UAG Series User's Guide
307
Section 26.3.1 on page 308 for more information).