Table 11 Front Panel LEDs (continued)
LED
SYS
WLAN
(UAG2100
or
UAG4100)
P1~P5
2.4 Rear Panel
The following figure shows the rear panel of the UAG.
2.4.1 UAG2100 or UAG4100
The rear panel contains a console port, a power switch and a connector for the power receptacle
and four antennas.
Chapter 2 Hardware Installation and Connection
COLOR STATUS
DESCRIPTION
Green
Off
The UAG is not ready or has failed.
On
The UAG is ready and running.
Blinking
The UAG is booting.
Red
On
The UAG had an error or has failed.
Green
On
The wireless network is activated.
Blinking
The UAG is communicating with other wireless clients.
Off
The wireless network is not activated.
Green
On
This port has a successful link to a 10/100 Mbps Ethernet network
Blinking
The UAG is sending or receiving packets to/from a 10/100 Mbps Ethernet
network on this port
Orange
On
This port has a successful link to a 1000 Mbps Ethernet network.
Blinking
The UAG is sending or receiving packets to/from a 1000 Mbps Ethernet
network on this port
Off
There is no connection on this port.
UAG Series User's Guide
40