ZyXEL Communications UAG5100 User Manual page 281

Figure 198 Configuration > Web Authentication > Walled Garden: Domain/IP Base
The following table describes the labels in this screen.
Table 123 Configuration > Web Authentication > Walled Garden: Domain/IP Based
LABEL DESCRIPTION
Walled Garden Use this table to manage the list of walled garden web site links.
Domain/IP List
Add Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
# This field is a sequential value, and it is not associated with any entry.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
Name This field displays the descriptive name of the web site.
Domain Name/IP This field displays the domain name or IP address and subnet mask of the web site.
Address
Apply Click this button to save your changes to the UAG.
Reset Click this button to return the screen to its last-saved settings.
Adding/Editing a Walled Garden Domain or IP
Go to the Configuration > Web Authentication > Walled Garden > Domain/IP Base screen.
Click Add or select an entry and click the Edit to open the Add/Edit Walled Garden Domain/IP
screen. Use this screen to configure the domain name or IP address entry for a walled garden web
site.
Chapter 23 Web Authentication
UAG Series User's Guide
281