The Ipsec Monitor Screen - ZyXEL Communications ZyWall USG20-VPN User Manual

Table 49 Monitor > Wireless > Detected Device (continued)
LABEL
Security
Description
Last Seen
Refresh

6.15 The IPSec Monitor Screen

You can use the IPSec Monitor screen to display and to manage active IPSec To access this
screen, click Monitor > VPN Monitor > IPSec. The following screen appears. SAs. Click a
column's heading cell to sort the table entries by that column's criteria. Click the heading cell again
to reverse the sort order.
Figure 104 Monitor > VPN Monitor > IPSec
Each field is described in the following table.
Table 50 Monitor > VPN Monitor > IPSec
LABEL
Name
Policy
Search
Disconnect
#
Name
Policy
IKE Name
Cookies
My Address
Chapter 6 Monitor
DESCRIPTION
This indicates the encryption method (if any) used by the detected device.
This displays the detected device's description. For more on managing friendly and rogue
APs, see the Configuration > Wireless > MON Mode screen.
This indicates the last time the device was detected by the USG.
Click this to refresh the items displayed on this page.
DESCRIPTION
Type the name of a IPSec SA here and click Search to find it (if it is associated). You can
use a keyword or regular expression. Use up to 30 alphanumeric and _+-
.()!$*^:?|{}[]<>/ characters. See
Type the IP address(es) or names of the local and remote policies for an IPSec SA and click
Search to find it. You can use a keyword or regular expression. Use up to 30 alphanumeric
and _+-.()!$*^:?|{}[]<>/ characters. See
Click this button to search for an IPSec SA that matches the information you specified
above.
Select an IPSec SA and click this button to disconnect it.
This field is a sequential value, and it is not associated with a specific SA.
This field displays the name of the IPSec SA.
This field displays the content of the local and remote policies for this IPSec SA. The IP
addresses, not the address objects, are displayed.
This field displays the Internet Key Exchange (IKE) name.
This field displays the cookies information that initiates the IKE.
This field displays the IP address of local computer.
USG20(W)-VPN Series User's Guide
Section 6.15.1 on page 124
Section 6.15.1 on page 124
123
for more details.
for more details.