The Ipsec Monitor Screen - ZyXEL Communications ZyWall USG 2000 User Manual

Unified security gateway

Hide thumbs Also See for ZyWall USG 2000:

Table of Contents

The following table describes the labels in this screen.

Table 42 Monitor > AppPatrol Statistics > Service

Service Name

Rule Statistics

Inbound Kbps

Dropped Data

Rejected Data

10.12 The IPSec Monitor Screen

You can use the IPSec Monitor screen to display and to manage active IPSec

SAs. To access this screen, click Monitor > VPN Monitor > IPSec. The following

ZyWALL USG 2000 User's Guide

This is the application.

This table displays the statistics for each of the service's application

patrol rules.

This field is a sequential value, and it is not associated with a specific

This is the incoming bandwidth usage for traffic that matched this

protocol rule, in kilobits per second. This is the protocol's traffic that the

ZyWALL sends to the initiator of the connection. So for a connection

initiated from the LAN to the WAN, the traffic sent from the WAN to the

LAN is the inbound traffic.

This is the outgoing bandwidth usage for traffic that matched this

protocol rule, in kilobits per second. This is the protocol's traffic that the

ZyWALL sends out from the initiator of the connection. So for a

connection initiated from the LAN to the WAN, the traffic sent from the

LAN to the WAN is the outbound traffic.

This is how much of the application's traffic the ZyWALL has sent (in

This is how much of the application's traffic the ZyWALL has discarded

without notifying the client (in kilobytes). This traffic was dropped

because it matched a policy set to "drop".

This is how much of the application's traffic the ZyWALL has discarded

and notified the client that the traffic was rejected (in kilobytes). This

traffic was rejected because it matched a policy set to "reject".

Click Cancel to close this screen.

Chapter 10 Monitor