En-Bloc Dialing - Avaya 9504 User Manual

17.4 En-Bloc Dialing

By default, when you start dialing a number on your phone, the phone immediately connects to the telephone system
and starts passing the digits you dial to the phone system. You cannot correct the digits you have already dialed except
by ending the call and starting over. Also, if you pause dialing for too long the phone system may think that you have
finished dialing and will attempt to connect the call using only the digits you had dialed up to that point.
En-bloc dialing allows you to compose and edit the number to dial on your phone's display before it is sent to the phone
system to be dialed.
Through the phone's menus you can select whether you want to use traditional or en-bloc dialing when making calls. Your
chosen setting is then applied whenever you use a phone that supports en-bloc dialing.
You can enable or disable your en-bloc dialing setting through the phone's Features menu.
1. Press the Features soft key if shown. To do this during a call, press the
Features soft key.
2. Use the up and down
4. Use the up and down
5. Use Change button to select On or Off.
9500 Series User Guide
IP Office™ Platform 9.1
arrow keys to highlight Call Settings. Press Select.
arrow keys to highlight En-Bloc Dial.
PHONE key and then press the
Issue 10a (16 January 2015)
Page 110