Mobile Twinning; Withhold Number; Redial Mode - Avaya 9504 User Manual

17.1 Mobile Twinning

This menu option is only available if you have been configured by the system administrator to be able to use mobile
twinning.
· Setting a button to the Twinning function is recommended—contact your system administrator. Such a button
allows you to transfer calls to your twinning destination, retrieve calls from the twinning destination, and access
the menu options below to set the twinning destination number and switch twinning on/off.
1. Press the Features soft key if shown. To do this during a call, press the
Features soft key.
2. Use the up and down
3. Use the up and down
4. If no twinning number has been set, the menu will prompt you to enter a number.
5. When a number has been entered, you can access the Enable and Disable soft keys to turn use of mobile
twinning on or off. The Clear soft key removes the existing twinning number in order to allow entry of a new
number.

17.2 Withhold Number

You can select to withhold your number on external calls. Note that this option may not be supported in all situations. It
may depend on the configuration of your phone system and options supported by your telephone line provider.
1. Press the Features soft key if shown. To do this during a call, press the
Features soft key.
2. Use the up and down
3. Use the up and down
4. Press Change to switch the option On or Off.
5. Press Save.
Access Control
Your system administrator can configure whether you can access this menu option. See

17.3 Redial Mode

You can select whether your phone uses the redial list or last call redial mode.
1. Press the Features soft key if shown. To do this during a call, press the
Features soft key.
2. Use the up and down
4. Use the up and down
5. The current mode, Open Call Log or Last Dialed is displayed.
Open Call Log
·
If this mode is selected, pressing Redial will display a menu of the most recent outgoing calls in your call log.
You can select the call that you want to redial and perform a number of other functions.
Last Dialed
· 30
If this mode is selected, pressing Redial will immediately repeat the most recent outgoing call in your call log.
None of the other redial functions will be accessible.
6. Press Change to change the mode.
7. When the desired mode is displayed, press Save.
9500 Series User Guide
IP Office™ Platform 9.1
arrow keys to highlight Forward. Press Select.
arrow keys to highlight Mobile Twinning. Press Select.
arrow keys to highlight Call Settings. Press Select.
menu keys to highlight Withhold Number.
arrow keys to highlight Call Settings. Press Select.
arrow keys to highlight Redial Action.
30
Phone Settings:
PHONE key and then press the
PHONE key and then press the
Menu Access Control
144
PHONE key and then press the
Issue 10a (16 January 2015)
.
Page 109