Redialling A Previous Number; Making A; Withholding Your Number - Avaya 9504 User Manual

2.5 Redialling a Previous Number

When Redial is displayed it can be used in one of two ways, set by the phone's
List Mode
This redial method is used when your phone's
1. Access the redial list.
a. Press Redial. The list of outgoing calls is displayed.
b. Use the up and down
2. Press Call to call the number displayed in the call record.
3. Continue in the same way as for a normal dialed call.
One Number Mode
This redial method is used when your phone's
1. Press Redial.
2. The number for the most recent outgoing call in your personal call log is redialed.
3. Continue in the same way as for a normal dialed call.
2.6 Making a Page Call
In order to make page calls you must have access to a paging short code provided by the system administrator or to a
paging feature button.
If the dialing short code or the paging button have been pre-configured with a number, the user or group at that number
will be paged if available.
The dialing short code can be configured to accept the number of the user or group to page when dialed. Similarly a
paging button can be set to allow number entry when pressed as follows:
1. Press the paging button.
2. Dial the number of the user or group you want to page.
3. When the dialing is completed, the page call is made.
· If the destination is a user and they already have a call connected, they cannot be paged. If the destination is
a group which is not in service or has no available members, it cannot be paged.
Feature Button
If enabled by your system administrator, the self-administer function can be used to assign a feature button as a page
button using the Group Paging action.

2.7 Withholding Your Number

You can select to withhold your number on external calls. Note that this option may not be supported in all situations. It
may depend on the configuration of your phone system and options supported by your telephone line provider.
1. Press the Features soft key if shown. To do this during a call, press the
Features soft key.
2. Use the up and down
3. Use the up and down
4. Press Change to switch the option On or Off.
5. Press Save.
Access Control
Your system administrator can configure whether you can access this menu option. See
9500 Series User Guide
IP Office™ Platform 9.1
redial mode
arrow keys to scroll through the 10 most recent outgoing calls.
redial mode
arrow keys to highlight Call Settings. Press Select.
menu keys to highlight Withhold Number.
Making Calls: Calling from the Call Log/History
redial mode setting
is set to List.
30
is set to One.
30
.
30
PHONE key and then press the
Menu Access Control
144
Issue 10a (16 January 2015)
.
Page 23