Twinning; Mobile Twinning Control - Avaya 1408 User Manual

15.4 Twinning

Twinning is a process whereby your calls ring on two phones. Twinning is only available if configured by the system
administrator.
There are two methods of twinning supported,
Internal Twinning
This method of twinning twins your normal phone with another internal phone. Your incoming calls will ring on both
phones. You can also make your calls from either extension.
A typical example for internal twinning would be a user who uses both a normal desk phone and also needs a mobile
phone while moving around the building.
Your settings are applied to both phones. Similarly message waiting indication and voicemail access from either phone will
be to your mailbox.
If both your twinned phones are use contacts and call log stored on the phone system, the call logs and directory contacts
on each will be the same.
· T = Twinned
A T is shown on a phone's display if it is internally twinned with your phone. Calls to you will alert on both phones
and can be answered by you at either phone.
Mobile Twinning
Mobile twinning is twinning
external number. If you have been configured as a mobile twinning user, you can switch use of mobile twinning on or off
through the phone's menus and also change the number to which you are twinned.
Using the phone menus you can switch use of mobile twinning on/off and change the destination number for twinned
calls.

15.4.1 Mobile Twinning Control

This menu option is only available is you have been configured by the system administrator to be able to use mobile
twinning.
· The addition of a button set to the Twinning function is recommended, contact your system administrator. Such a
button allows you to transfer a call to your twinning destination, retrieve a call from the twinning destination and access
the menu options below to set the twinning destination number and switch twinning on/off.
1. Press the Features soft key if shown.
· To access the menu during a call, press the
the Features soft key.
2. Use the up and down
3. Press the Select soft key or the OK button or the
4. Use the up and down
5. Press the Select soft key or the OK button or the
6. If no twinning number has been set, the menu will prompt you to enter a number.
7. When a number has been entered, you can access the Enable and Disable soft keys to turn use of mobile twinning
on or off. The Clear soft key removes the existing twinning number in order to allow entry of a new number.
1408, 1416 Phone User Guide
IP Office
internal twinning
where your calls ring at both your phone and at another number which can include an
181
arrow keys to scroll the menu to Forward.
arrow keys to scroll the menu to Mobile Twinning.
and mobile twinning
180
right arrow key or press the
right arrow key.
right arrow key.
Redirecting Calls: Do Not Disturb
.
180
PHONE key and then press
15-601040 Issue 05a (25 October 2011)
Page 105