Fcc Information - nVideon TLC User Manual

 FCC Information
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the underside of this equipment is a label that
contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX.
On the bottom of this equipment is a label that contains an FCC Part 68
registration number in the format:
and a ringer equivalence in the format:
If requested, these numbers must be provided to the telephone company.
 Plug and Jack: The plug and jack used to connect this equipment to premise
wiring and telephone network must comply with the applicable FCC Part 68
rules and requirements adopted by ACTA. A compliant telephone cord and
modular plug is provided with this product. The telephone cord is designed to
be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
Ringer Equivalency Number (REN): The REN is used to determine the
number of devices that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices not ringing in response to
an incoming call. In most but not all areas, the sum of the RENs should not
exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local
telephone company. The REN for the equipment is part of the ACTA/FCC
number that has the format US:AAAEQ##TXXXX. The digits represented by
the ## are the REN without the decimal point (e.g., 01 is a REN of 0.1) and
are followed by the Ringer Class (A or B).
 Harm to the Network: If this equipment causes harm to the telephone
network, the telephone company will notify you in advance that the temporary
discontinuance of service may be required. But if advance notice isn't
practical, the telephone company will notify the customer as soon as possible.
Also, you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
 Notification of Changes in Telephone Company Equipment: The
telephone company may make changes in its facilities, equipment, operations
or procedures that could affect the operation of the equipment. If this
happens, the telephone company will provide advance notice in order for you
to make necessary modifications to maintain uninterrupted service.
Repairs or Returns: If trouble is experienced with this equipment, for repairs

or warranty information, contact the factory service center or other authorized
servicer. If the equipment is causing harm to the telephone network, the
telephone company may request that you disconnect the equipment until the
Copyright 2013-2015, nVideon, Inc. Atlanta, GA All Rights Reserved Worldwide
Preliminary
US:SWQHN00BTLC001
REN: 0.01B
Page 74 of 76