nVideon TLC User Manual page 68

Enter the dialing time out in seconds followed by #. When
dialing internationally and when
if a caller has not dialed a digit for the specified timeout, Tel-Lynx
will place the call with the number entered.
Press 5 to Set the
Press 1 for No PBX
Press 3 for PBX with 3-digit extensions
Press 4 for PBX with 4-digit extensions
Press 5 for PBX with 5-digit extensions
Press 6 for PBX with 6-digit extensions
 Press 9 to Set the Date, Time, and Temperature Preference
Press 1 to Set the Date and Time
Press 1 to Enable Automatic Daylight Saving Time
Press 2 to Disable Automatic Daylight Saving Time
Then enter the date and time as prompted by Tel-Lynx. You may enter
# for the year, month, and day to keep the current setting.
Press 2 for Degrees Celsius
Press 3 for Degrees Fahrenheit
Note: To set temperature preference, an optional temperature sensor is
required.
 Press
8
You will be asked which user will leave the message, then to select a mailbox
(user) for the message, and then you will be asked to leave your message.
 Press
9
Outside Line Status
You can also hear this information by pressing # 9 at the dial tone.
Note: To hear the temperature, an optional temperature sensor is required.

On a Call Menu
To use the On a Call Menu while you are on a call, flash the switch hook. This
places the call on exclusive
Press 0 to Go Back to Current Call
Press 1 to Answer Pending Call / Switch to Waiting Call
Press 2 to Send Pending Mobile Call to Mobile Voice Mail
23 An exclusive hold allows only the inside line that placed the call on hold to go back to that call.
Copyright 2013-2015, nVideon, Inc. Atlanta, GA All Rights Reserved Worldwide
Preliminary
PBX Mode of Operation
to Leave a Voice Message for a User
to Hear the Temperature, Time, Date, and
23 hold.
dialing an internal PBX extension,
Page 68 of 76