Table of Contents
Advertisement
Fax Sharing the Landline with Tel-Lynx
In this method, both Tel-Lynx and the fax machine are attached to your landline.
You must have a separate fax phone number using a service like RingMaster
Fax calls will have a different ring pattern than normal calls.
ignore the ring pattern
answer calls with that ring pattern (or to not answer a call for several rings).
Fax Attached to one of Tel-Lynx's Inside Lines
In this method, the fax machine is connected to one of Tel-Lynx 's inside lines
(just like your telephones are).
(case insensitive) and set up the fax user as follows:
Set Ring Pattern to two rings
Set Ring Mode to ring only the inside line attached to the fax machine, and
Set Select Outside Lines to be the landline only.
Set up your fax machine to only answer a two-ring pattern. When a call from
another fax machine comes in and Tel-Lynx hears the fax Tone (beep sound), it
will skip the qualification process and immediately ring the inside line for the fax
machine with the two-ring pattern. When the fax machine answers, it will be
immediately connected to the calling fax machine. In this method, you do not
need a service like Ring Master
machine.
When sending a fax, Tel-Lynx will bypass the
enabled) as soon as it hears the fax tone.
Timed Functions
Do-Not-Disturb
Tel-Lynx uses the Do-Not-Disturb feature to send selected calls to voice mail
without ringing your telephones. There are two ways to set up Do-Not-Disturb:
set a
schedule
or
temporarily override the
takes precedence over the schedule. If the schedule is not enabled, the override
simply sets a Do-Not-Disturb period.
15
No other TLC user should have a two-ring pattern when using this method, as the fax machine will most
likely not distinguish between short and long rings in a given pattern.
Copyright 2013-2015, nVideon, Inc. Atlanta, GA All Rights Reserved Worldwide
Preliminary
for calls to the fax number, and set up your fax machine to
Set up a user on Tel-Lynx
15
,
®
or a separate phone number for your fax
schedule. The override feature always
Set up Tel-Lynx to
with the name "Fax"
Auto Create Contact
®
.
option (if
Page 40 of 76
Advertisement
Table of Contents
