nVideon TLC User Manual page 64

Press the numbers one after the other, and then press #. The
days you have not set for schedule 1 will be used for schedule 2. If
no days are left, schedule 2 will not be used.
 Press 3 to Set up
Press 1 to Set up a User
Select User, then:
Press 1 to Select User's Ring Pattern
Press 2 to Select User's Ring Mode
Press 3 to Select Outside Lines for this User
Press 4 to Enable Call Waiting for this User
Press 5 to Disable Call Waiting for this User
Press 6 to Record User's Name
Press 7 to Edit the User's Name
Press 8 to Edit the User's Password
Press 2 to Disable a User and Delete their Messages
Press 3 to Set Number of Rings before Going to Voice Mail
 Press 4
to Set up the
Press 1 to Setup Outside Line 1 (Landline)
Press 2 to Setup Outside Line 2 (Skype™)
Press 3 to Setup Outside Line 3 (Mobile Phone 1)
Press 4 to Setup Outside Line 4 (Mobile Phone 2)
Submenu for Managing Outside Lines:
Press 1 to Hear and Change Greeting
Press 2 to Enable/Disable Skip Greeting Known Callers
Press 3 to Enable/Disable
Press 4 to Enable/Disable Call Waiting
Press 9 to Enable/Disable Ring-through mode for current line
The following applies to Skype:
Press 8 to Re-record the Name of the Outside Line
The following applies to Landlines:
Press 5 to Enable/Disable *70 to Disable Call Waiting
Press 6 to Set up 3-Way Calling
Press 1 to Disable 3-Way Calling
Press 2 to Enable 3-Way Calling w/ Flash Before Dialing
Press 3 to Enable 3-Way Calling w/ Flash After Dialing
Press 4 to Enable 3-Way Calling w/ Flash Before Dialing
Press 7 to Set Dialing Mode
Press 1 to Dial Landline using Normal Dialing Rules
Copyright 2013-2015, nVideon, Inc. Atlanta, GA All Rights Reserved Worldwide
Preliminary
Users and Voice Mail
Outside Lines
SIT Tone
and Double Flash to Join 3-Way Calls (for Ooma
for Unknown Callers
Page 64 of 76
®
)