Placing A Call - nVideon TLC User Manual

If the contact has an extension, a work number, and an organization name, a
separate "Business" contact with the organization name and the work phone
number will be created.
 +Type={Super, Normal, Work, or Blocked}
Sets the contact type.
For example, to set the contact's type as a work day contact: +Type=Work
 +TxtAlert={True, False}
Sets whether new text messages from this contact will ring the telephones to
alert you when the contact's type does not allow the alert. In other words, if set to
'True', text messages from this contact will override the text message alert group
setting for the contact's type and will alert you.
For example, to set a contact so text messages from this contact will alert you
when the contact's type is not set to alert you: +TxtAlert=True
 +Urgent={True or False}
Allows urgent calls from this contact (True) or not (False).
For example, to disallow urgent calls from this contact: +Urgent=False
 +User={#}{1,2,3,4,5,6,7, or 8}
This sets the person normally called by this contact. If the user's number is
prefixed with '# ', Tel-Lynx will always send calls to the specified user.
For example, to always send calls from this contact to user 2: +User = #2
 +X
If present, this contact will not be added to Tel-Lynx's phone book.
 Placing a Call
With a telephone connected to Tel-Lynx, to place a call, take the telephone off-
hook, and at the dial tone, do one of the following:
 Dial the phone number directly,
 Dial-By-Name,

Dial using the last 4

Speed dial,

Call a Tel-Lynx
 Have Tel-Lynx
Copyright 2013-2015, nVideon, Inc. Atlanta, GA All Rights Reserved Worldwide
Preliminary
digits,
user, or
redial or return the last call.
Page 25 of 76