nVideon TLC User Manual page 12

Note: When entering names
with the letter you want to enter the number times corresponding to the letter's
position on the key (e.g. for the letter 'C' you would press the C key three
times quickly).
When Dialing-By-Name, you only press the key once for each letter.
The * and # keys are used extensively by Tel-Lynx. They have different
functions depending on whether they are entered at the dial tone or after another
key has been pressed.
Note: Cordless telephones do not have a visible switch hook. They have a
button near the keypad called flash that is used to
in their base station. Use this button whenever this manual calls for you to flash
the switch hook.

Rotary Dial Telephones
Tel-Lynx allows rotary dial users to easily navigate its menus and to Dial-By-
Name. You can also navigate phone trees that require touch tones while on a
call. Tel-Lynx 's menus and Dial-By-Name feature make use of the touch tone
* and # keys. Tel-Lynx uses the switch hook in a special way to provide
the equivalent of these keys when rotary dialing.
 When on a Call (on Rotary Dial Telephones)
To navigate phone trees, Tel-Lynx will generate touch tone signals that
correspond to any digits you dial on a rotary telephone. To generate a touch-tone
*, flash the switch hook
flash the switch hook and then dial 2. To enter Tel-Lynx's
the switch hook and then dial 3.
Note: When you are on a call, Tel-Lynx always audibly reminds you of your
options after you flash the switch hook.
 When in a Tel-Lynx Menu (on Rotary Dial Telephones)
Flash the switch hook once to enter a * or double flash to enter a #.
 When Dialing (on Rotary Dial Telephones)
After dialing at least one digit, flash the switch hook to enter a * and Double
flash to enter a #
To enter a * at the dial tone (before dialing any digits), dial 0, then
immediately flash the switch hook. For example to dial * 6 7 you dial
0, then flash the switch hook, and then dial 6, then 7.
Copyright 2013-2015, nVideon, Inc. Atlanta, GA All Rights Reserved Worldwide
Preliminary
into Tel-Lynx, you will press the key associated
and then dial 1. To generate a touch-tone #,
flash the internal switch hook
On a Call Menu
Page 12 of 76
, flash