Speed Dialing - nVideon TLC User Manual

Note: 4-Digit Dialing may not be available when using Tel-Lynx with a PBX.
See Using Tel-Lynx with a PBX
Rotary Dialing: Dial the last four digits and then


Speed Dialing

Tel-Lynx supports nine speed dial numbers corresponding to keys 1 through
9. To assign a speed dial
menu. To use speed dialing, take the telephone off-hook, and at the dial tone,
press the speed dial number followed by #. For example, if you press 2
# Tel-Lynx will call the number assigned to speed dial 2.
Rotary Dialing: {Speed Dial Number},
For example, to call speed dial 5:
If you want to learn which contact and phone type is assigned to a particular
speed dial key, at the dial tone, press that key and wait for 3 seconds. Tel-Lynx
will say the name and phone number type of the contact assigned to that speed
dial. If that is the contact you want to call, press #.

Calling Another User
You can call other users on the system
to Tel-Lynx, or are using both inside lines on Tel-Lynx, or you are using Tel-Lynx
with a PC,. Use main menu item
system will prompt you for your user name and the name of the user you want to
call.
As a shortcut, at the dial tone, dial your user number followed by the user's
number you want to call, followed by the # key.
Rotary Dialing:. Dial your user number followed by the user's number you
want to call, then double flash the switch hook.

Redial / Call Back
To redial, or to call back the last call, take the telephone off-hook, and at the dial
tone, press * *.
For instance, if you're on a call that you placed (or received) and the call is
dropped, call back quickly by pressing * * at the dial tone.
Rotary Dialing: To redial,
13 Please note that you cannot cause any telephones to ring that are attached to the same inside line as the
one you are using to place the call. The Tel-Lynx Guardian can only call other users if they are using the
Tel-Lynx application on a PC.
Copyright 2013-2015, nVideon, Inc. Atlanta, GA All Rights Reserved Worldwide
Preliminary
for more information.
see the Manage Phone Book Contacts in the Main
double
5, double flash
13 if you have a two line phone connected
"Call another User on the
double flash at dial tone
double flash the switch hook.
flash.
System." The menu
Page 29 of 76