Table of Contents
Advertisement
Note: Tel-Lynx keeps the phone number of the last call for each inside line
separately, so make sure you pick up the same inside line you just hung up.
Note: For the call back to work properly, Caller ID service is required, and the
last caller must not have blocked their number.
Auto Create Contact Option
When auto create contact is enabled, you can create contacts in Tel-Lynx's
phone book as you call people. When you dial a number that is not in Tel-Lynx's
new call list
or phone book, Tel-Lynx will prompt with two options. Press 1
or do nothing and Tel-Lynx will dial the phone number without creating a new
contact. Otherwise, press 2 to create a new contact before calling the phone
number. If you opt to create a new contact, Tel-Lynx will ask you to record the
name, enter the phone
and then key in the contact's name.
When recording the contact's name, you can press # to end the recording, or
Tel- Lynx will automatically end it after you stop speaking. After the recording has
ended, you can press # to hear what you recorded before accepting it.
If you press # # when asked to enter the name, Tel-Lynx will put the
phone number and recorded name in the
call the number.
The auto create contact feature helps you to efficiently expand your phone book.
It can be enabled and disabled (see Main Menu Set up the System
Answer Mode and Call Out
Selecting a Specific Outside Line
When placing a call, Tel-Lynx will select an available
of user-defined calling tables. To override the calling tables and specify an
outside line for a call:
At the dial tone, press # and then enter the outside line number.
Outside line 1=
Outside line 2= Skype™
Outside line 3= MobilePhone1
Outside line 4= MobilePhone2
If the outside line is available, Tel-Lynx will produce a dial tone with two stutters,
and then you can place the call. The line selection is cancelled when you hang
up.
Example: # 2 selects Skype
Copyright 2013-2015, nVideon, Inc. Atlanta, GA All Rights Reserved Worldwide
Preliminary
number
type, set the
new call list
Mode).
Landline
for the call.
™
urgent call status
for the contact,
without a name and then
outside line
Set the
based on a set
Page 30 of 76
Advertisement
Table of Contents
