nVideon TLC User Manual page 62

Press 3 to Go to the Previous Selected Contact
Press 4 to Call the Contact
Press 5 to Text the Contact
Press 6 to Assign a Speed Dial Number
Press 7 to Delete the Contact
Press 8 to Accept Voice Tag as Recorded from
Press 9 to List other Contacts with the Same Phone Number
Press # to Display Contact's Name/Number on Caller ID Screen
 Press
4
Select your own user number.
Select the user number of the user you want to call.
 Press
5
After you hear the last connected number you can:
 Press 5 1
 Press 5 2
 Press 5 3
 Press 5 4
 Press
6
When you place a call, Tel-Lynx selects an
you have set up. If you want to specify a line other than the one on your call list,
choose from the following:
 Press 6 1
6 2
 Press
 Press 6 3
 Press 6 4
After you have selected one of the four lines, you'll hear, "(Name of line)
selected" and then a stutter dial tone. If you choose a line that is busy or not
available, you'll hear, "(Busy line) is busy; returning to default calling sequence."
After you hang up, Tel-Lynx will return to using the default outside line.
Note: At the dial tone you can specify an outside line by pressing #, then
the line number. For example # 1 selects outside line 1.
Copyright 2013-2015, nVideon, Inc. Atlanta, GA All Rights Reserved Worldwide
Preliminary
to Call a Tel-Lynx User
to Hear Last Phone Number/Change Toll Status
to Call the Number
to Add the Number to Phone Book
to Change Toll Call Status for the Number
to Compose Text to the Number
to Specify an Outside Line
to Select Line 1, Landline
to Select Line 2, Skype™
to Select Line 3, Mobile Phone 1
to Select Line 4, Mobile Phone 2
Text-to-Speech
outside line based on a call list that
Page 62 of 76