Table of Contents
Advertisement
mode. If you are on a call when you flash the switch hook, that call will be put on
hold; flash the switch hook again, and you will be reconnected to the call.
Rotary Dialing: exceptions to this flashing rule:.
1) If you flash the switch hook twice quickly (double flash) at the dial tone,
Tel- Lynx will call the last number dialed.
2) When looking up a contact or setting a timer in the On a Call Menu, the
switch hook simulates the * (single flash) and # (double flash) keys.
3) When in any of the submenus of the main menu, once you start dialing, the
switch hook always simulates the * (single flash) and # (double flash) .
There are four root menus in the Tel-Lynx system:
Announcement
Menu, and
structure. Menu instructions will repeat until you press a key. To return to a
previous branch, press 0. If you're entering a number or name, press and
hold 0 to return to the previous branch. On many menus, press * and
then the option number to hear its description. To replay a menu from the start,
press * twice.
You don't have to wait to hear an option before pressing a key. If you know its
number, you can press the key and Tel- Lynx will immediately take action.
Tel-Lynx Main Menu
To enter the Main Menu, at the dial tone, flash the
Here is a list of main menu functions for telephone keypad keys 1 through
9, followed by detailed instructions.
1
Set Do-Not-Disturb and Other Timed Functions
2
Listen to Voice Mail and Text Messages
3
Manage the Phone Book
4
Call Another Tel-Lynx User
5
Hear Last Number Called or Received
6
Select an
Outside Line
7
Set up Tel-Lynx
8
Leave a Voice Message for a User
9
Hear the Date, Time, and Line Status
1
Set Do-Not-Disturb and Timed Functions
Press # to Cancel, Press 0 to Go Back
Copyright 2013-2015, nVideon, Inc. Atlanta, GA All Rights Reserved Worldwide
Preliminary
Call-In
Menu. Each menu is organized in a tree
Main
Menu,
On a Call
switch
hook.
Page 56 of 76
Menu,
Advertisement
Table of Contents
