nVideon TLC User Manual page 31

Personal telephone assistants
Table of Contents

Advertisement

Rotary Dialing: 0,
For example, to select MobilePhone2: 0, double flash, 4
Connecting Directly to the Landline
To connect directly to the landline without Tel-Lynx intervention, at the dial tone,
press # # 1. You will then hear the dial tone provided by your
landline provider, not the dial tone provided by Tel-Lynx, and you can dial directly
on the landline service. You will not be able to use Tel-Lynx's phone book, speed
dial, redial, or call back features. This feature is cancelled when you hang up.
Rotary Dialing: 0, double flash, double flash, 1
For example, to dial directly using the landline: 0, double flash, double flash,
1
Caution: Do not delay in flashing the switch hook after dialing 0 or you will
invoke the operator feature.
Dialing Notes
It is important to remember that your telephones in your home or business are
connected to Tel-Lynx and not directly connected to any of your phone
providers. The dial tone you hear when you pick up your home telephone is
coming from Tel-Lynx, not from your Telco, VoIP, or
will not be connected to any of those services until Tel-Lynx places your call.
Tel-Lynx monitors
outside line
and which are available to place a call. Tel-Lynx will make an announcement if
no outside lines are available to place a call, and will provide a dial tone so that
you can try again. Press * * to retry the call.
See
Setting up the Outside Lines
 Dialing in the North American Number Plan
The USA and its territories, along with several other countries (Canada,
Bermuda, Bahamas, etc.) use the North American Number Plan (NANP) to
assign telephone numbers. A complete NANP number always starts with a '1'
followed by a three digit area code (NPA), a three digit central office or prefix
code (NXX), and a four digit subscriber number (XXXX).
Country
Code
The dialing rules for a given area vary throughout the NANP. To place a local
call, in some areas you dial only the last 7 digits (NXX-XXXX), while in other
areas you must dial the last 10 digits (NPA-NXX-XXXX). In some areas, to place
a local call, you dial 7 digits in your home area code, but must dial 10 digits in a
Copyright 2013-2015, nVideon, Inc. Atlanta, GA All Rights Reserved Worldwide
Preliminary
double
flash, {Outside Line}
activity, so it knows which outside lines are in use
for more information.
1
-
NPA
Area
Code
mobile phone
-
NXX
-
XXXX
Prefix
Subscriber
Number
service
provider. You
Page 31 of 76

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tel-lynx guardian plusTlc plusTel-lynx guardian

Table of Contents