Table of Contents
Advertisement
3-2-2 Port Forwarding
This function allows you to redirect a single port or consecutive ports of
an Internet IP address to the same port of the IP address on the local
network. The port number(s) of Internet IP address and private IP
address (the IP address on local network) must be the same. If the port
number of Internet IP address and private IP address are different, use
the 'Virtual Server' function, described in the next section.
Click the 'NAT' menu on the left of the general setup interface, then click
'Port Forwarding', and the following will be displayed on your web
browser:
1
2
Here are descriptions of every setup item:
Enable Port
Forwarding (1):
Private IP (2):
3
Check this box to enable port forwarding,
and uncheck this box to disable port forwarding.
Input the IP address of the computer on the local
network which provides the Internet service.
114
4
7
10
11
13
6
5
8
9
12
Advertisement
Table of Contents
