Setup Procedure For 'Ap Bridge-Point To Multi-Point - Comtrend Corporation AC 1200 User Manual

2.7.1.4 Setup procedure for 'AP Bridge-Point to Multi-Point':

In this mode, you can connect your wireless router with at least four
wireless routers to expand the scope of wireless network, and all clients
(wired only – AP will not accept wireless clients in this mode) of the
wireless routers will think they're on the same physical network.
Select AP Bridge (Point to Multi-Point) from the 'Mode' drop-down
menu (1), and the following will be displayed:
Here are descriptions of every setup item:
Band (2):
Channel
Number (3):
MAC address
1 to 4 (4 - 7):
Security
Settings (8):
Select the band you want to use, all the wireless
routers must use the same setting.
Select the channel you want to use, all the wireless
routers must use the same setting.
Input the MAC address of the other wireless
routers.
Click the 'Security Settings' button for this
connection.
(Go to section '2-7-3 Wireless Security'
for detailed instructions).
81
1
2
3
4
5
6
7
8