Upnp Setting - Comtrend Corporation AC 1200 User Manual

3-2-5 UPnP Setting

This function enables network auto-configuration for peer-to-peer
communications, with this function, network devices will be able to
communicate with other devices directly, and learn about information
about other devices. Many network devices and applications rely on
UPnP function nowadays.
Click the 'NAT' menu on the left of the web management interface, then
click 'UPnP', and the following will be displayed on your web browser:
Select 'Enable' or 'Disable' to enable or disable UPnP function, then click
the 'Apply' button, and the following will be displayed on your web
browser:
Click the 'Continue' button to go back to the previous setup menu; to
continue on other setup procedures, or click the 'Apply' button to
reboot the router so the settings will take effect (wait for about 60
seconds while the router is rebooting).
If you want to reset all settings in this page back to previously-saved
values, click the 'Cancel' button.
123