Table of Contents
Advertisement
Preamble Type (8): The Preamble type defines the length of the CRC
Broadcast ESSID (9): Decide if the wireless router will broadcast its own
CTS Protect (10):
Tx Power (11):
(Cyclic Redundancy Check) block for
communication between the Access Point and
roaming wireless adapters. Do not modify the
default value if you don't know what it is, default
setting is 'Short Preamble'.
ESSID or not. You can hide the ESSID of your
wireless router (set the option to 'Disable'), so only
people those who know the ESSID of your wireless
router can get connected.
Enabling this setting will reduce the chance of radio
signal collisions between 802.11b and 802.11g/n
wireless access points. It's recommended to set this
option to 'Auto' or 'Always'. However, if you set to
'None', your wireless router should be able to work
fine, too.
Select the wireless transmitting power level, from
10% to 100%. When wireless clients are not too far
from this Wireless-N Range Extender, you don't
have to select a higher power level, since this may
cause some individuals to attempt to break into
your wireless network if you have a bad password,
or no password. Select from the drop-down menu.
Default is set at 100%.
88
Advertisement
Table of Contents
