Comtrend Corporation AC 1200 User Manual page 129

Delete (8):
Delete All (9):
Reset (10):
Enable IP
Filtering (11):
IP Filtering
Table (12):
Add PC (13):
If you want to delete a specific MAC address entry,
check the 'select' box of the MAC address you want
to delete, then click the 'Delete' button. (You can
select more than one MAC address).
If you want to delete all MAC addresses listed here,
click the 'Delete All' button.
You can also click the 'Reset' button to unselect all
MAC addresses.
Check this box to enable IP address based
filtering, and select 'Deny' or 'Allow'
to decide the behavior of the IP filtering table. If
you select deny, all IP addresses listed in the
filtering table will be denied from connecting to the
network; if you select allow, only IP addresses listed
in the filtering table will be able to connect to the
network, and all other network devices will be
rejected.
All existing IP addresses in the filtering table will be
listed here.
Click this button to add a new IP address to the IP
filtering table, up to 20 IP addresses can be added.
Refer to section 'Add PC' below.
129