5.7.2 Static Port Mapping
Any Static WAN address that are set up will be listed, click on the Add button add a
new entry or select an entry and click on the Delete button.
Add an Entry
To add an entry click on the Add button, and then enter the following information,
and then click on the Apply button:
Public IP Address: Enter the you wish to set the Public port range
Public Port From: Enter the starting port for the Public port-range
Public Port To: Enter the last port for the Public port-range
Local Address: Enter the Local address
Local Port From: Enter the starting port for the Local port-range
Local Port to: Enter the last port for the Local port-range
Protocol: Select UDP or TCP
46