Table of Contents
Advertisement
2-3-4 Setup procedure for PPTP
PPTP xDSL requires two kinds of settings: WAN interface setting (setup
IP address) and PPTP setting (PPTP user name and password). Here we
start from the WAN interface setting:
Select how you obtain and IP address from your service provider. You
can choose 'Obtain an IP address automatically' (equal to DHCP, refer to
'Cable Modem' section above), or 'Use the following IP address' (i.e.
static IP address).
WAN interface settings must be correctly set, or the Internet connection
will fail even though the PPTP settings are correct. Contact your Internet
service provider if you don't know how to fill in these fields.
Now go to the PPTP settings section:
29
Advertisement
Table of Contents
