Remote Management - Comtrend Corporation AC 1200 User Manual

2-4-3 Remote Management

This router does not allow remote management access from the Internet
by default. However, you can still manage this router from a specific IP
address by enabling the 'Remote Management' Function.
To do so, follow the instructions below:
Click the 'System' menu on the left of the web management interface,
then click 'Remote Management', and the following will be displayed on
your web browser:
Here are descriptions of every setup item:
Host Address (1):
Port (2):
1
Input the IP address of the remote host you wish to
initiate management access with.
You can define the port number this router should
expect an incoming request from. If you're
providing a web service (default port number is 80),
you should try to use another port number. You can
use the default port setting '8080', or something
like '32245' or '1429'. (Any integer between 1 and
65534)
40
2 3
4