Comtrend Corporation AC 1200 User Manual page 122

Delete (11):
Delete All (12):
Reset (13):
Note: Only one LAN client can use a particular special application at a
time.
After you complete all settings, click the 'Apply' (14) button and the
following will be displayed on your web browser:
Click the 'Continue' button to go back to the previous setup menu; to
continue on other setup procedures, or click the 'Apply' button to
reboot the router so the settings will take effect (wait for about 60
seconds while the router is rebooting).
If you want to reset all settings in this page back to previously-saved
values, click the 'Cancel' button.
Select a special application by clicking
the 'Select' box of the mapping, then click the
'Delete' button to remove the setting. If there's no
setting here, this button will be grayed out.
Delete all settings that exist in the trigger port
table.
Unselect all settings.
122