Setup Procedure For Pppoe - Comtrend Corporation AC 1200 User Manual

2-3-2 Setup procedure for PPPoE

Here are descriptions of every setup item:
User Name (1):
Password (2):
Service Name (3):
MTU (4):
Connection
Type (5):
Idle Time Out (6):
When you complete all settings, click the 'OK' (7) button; if you want to
go back to the previous menu, click the 'Back' button.
Input the user name assigned by your Internet
service provider.
Input the password assigned by your Internet
service provider.
Give a name to this Internet service. This is
optional.
Input the MTU value of your network connection. If
you don't know, you can use the default value.
Select the Internet connection type
you wish to use (detailed explanation listed below).
Input the idle time out, (detailed explanation listed
below).
26
1
2
3
4
5
6
7