Table of Contents
Advertisement
IP address (3):
'Add' (4):
If you want to remove all the characters you just inputted, click the
'Clear' button.
After you clicked the 'Add' button, the MAC address and IP address
mapping will be added to the 'Static DHCP Leases Table' section.
If you want to delete a specific item, check the 'Select' box of a MAC
address and IP address mapping (1), then click the 'Delete' button (2);
if you want to delete all mappings, click the 'Delete All' (3) button.
After you complete all LAN settings, click the 'Apply' button on the
bottom of this page. After you click 'Apply', the following will be
displayed on your web browser:
Input the IP address you want to assign to this
computer or network device.
After you inputted the MAC address and IP
address pair, click this button to add the pair to
the static DHCP leases table.
70
2
3
1
Advertisement
Table of Contents
