Table of Contents
Advertisement
Channel
Number (4):
Associated Clients (5): Click the 'Show Active Clients' button, then an
Root AP SSID (6):
Site Survey (7):
After you complete the wireless settings, click the 'Apply' button, after
you click the 'Apply' button, the following will be displayed on your web
browser:
Click the 'Continue' button to go back to the previous setup menu; to
continue on router setup, or click the 'Apply' button to reboot the router
so the settings will take effect (wait for about 60 seconds while router is
rebooting).
Select the channel you want to use, all the wireless
clients must use the same setting.
"Active Wireless Client Table" will pop up. You can
see the status of all active wireless stations that are
connecting to the access point.
In 'Universal Repeater' mode, this device can act as
a station to connect to a Root AP. You should assign
the SSID of the Root AP here or click the 'Select Site
Survey' button to choose a Root AP.
Click the 'Select Site Survey' button, then a
"Wireless Site Survey Table" will pop up. It will list
all available access points nearby. You can select
one access point in the table and the router will join
the wireless LAN through this access point.
85
Advertisement
Table of Contents
