Table of Contents
Advertisement
Default Tx Key (4):
Encryption Key
1 (5):
Enable 802.1x
Authentication (6): user must use a valid account to login to this
6
RADIUS Server
IP address (7):
You can set up to four sets of WEP key, and you can
decide which key is being used by default here. If
you don't know which one you should use, select
'Key 1'.
Input the WEP key characters here, the number of
characters must be the same as the number
displayed in the 'Key Format' field. You can use any
alphanumerical characters (0-9, a-z, and A-Z) if you
select 'ASCII' key format, and if you select 'Hex' as
key format, you can use characters 0-9, a-f, and
A-F. You must input at least one encryption key
here, and if you inputted multiple WEP keys, they
should not be same as each other.
IEEE 802.1x is an authentication protocol. Every
wireless router before accessing the wireless LAN.
The authentication is processed by a RADIUS server.
This mode only authenticates the user by IEEE
802.1x, but it does not encrypt the data during
communication. If there is a RADIUS server in your
environment, enable this function. Check this box
and another sub-menu will appear:
Input the IP address of the radius
server.
92
7
8
9
Advertisement
Table of Contents
