3-2-1 Basic NAT Settings (Enable or disable NAT function)
Click the 'NAT' menu on the left of the web management interface, and
the following will be displayed on your web browser:
1
2
To enable the NAT function, select 'Enable' for 'Enable NAT module
function' (1); to disable, select 'Disable'.
After you made the selection, click the 'Apply' button (2) and the
following will be displayed on your web browser:
Click the 'Continue' button to go back to the previous setup menu; to
continue on other setup procedures, or click the 'Apply' button to
reboot the router so the settings will take effect (wait for about 60
seconds while router is rebooting).
113