Table of Contents
Advertisement
3-2-7 IGMP Settings
The Internet Group Management Protocol (IGMP) is a communications
protocol used to manage the membership of Internet Protocol multicast
groups. IGMP is used by IP hosts and adjacent multicast routers to
establish multicast group memberships. It is an integral part of the IP
multicast specification, like ICMP for unicast connections. IGMP can be
used for online video and gaming, and allows more efficient use of
resources when supporting these uses.
Click the 'NAT' menu on the left of the web management interface, then
click 'IGMP Settings', and the following will be displayed on your web
browser:
Select 'Enable' or 'Disable' to enable or disable IGMP function, then click
the 'Apply' button, and the following will be displayed on your web
browser:
Click the 'Continue' button to go back to the previous setup menu; to
continue on other setup procedures, or click the 'Apply' button to
reboot the router so the settings will take effect (wait for about 60
seconds while the router is rebooting).
If you want to reset all settings in this page back to previously-saved
values, click the 'Cancel' button.
125
Advertisement
Table of Contents
