Table of Contents
Advertisement
6.3.2
Port Triggering
Note: This option is not available for Bridge mode.
Some applications require that specific ports in the IAD's firewall be opened for
access by the remote parties. Port Trigger dynamically opens up the 'Open Ports' in
the firewall when an application on the LAN initiates a TCP/UDP connection to a
remote party using the 'Triggering Ports'. The IAD allows the remote party from the
WAN side to establish new connections back to the application on the LAN side using
the 'Open Ports'. A maximum 32 entries can be configured.
To add a Trigger Port, simply click the Add button. The following will be displayed.
56
Advertisement
Table of Contents
