Table of Contents
Advertisement
2.7.1.5 Setup procedure for 'AP Bridge – WDS'
In this mode, you can expand the scope of the network by combining up
to four other access points together, and every access point can still
accept wireless clients.
Select AP Bridge (WDS) from the 'Mode' drop-down menu (1), and the
following will be displayed:
NOTE: For WDS mode, the output signal nature is the same as that of normal
AP mode.
Here are descriptions of every setup item:
Band (2):
SSID (3):
Select the band you want to use, all the wireless
routers must use the same setting.
Input the SSID of your wireless router, the setting
should be the same with other wireless routers for
the convenience of roaming.
82
1
2
3
4
5
6
7
8
9
10
Advertisement
Table of Contents
