Comtrend Corporation AC 1200 User Manual page 77

2.4 GHz (B)
2.4 GHz (N)
2.4 GHz (B+G)
2.4 GHz (G)
2.4 GHz (B+G+N)
NOTE: For 802.11b and 802.11g mode, the signals can be transmitted only
by antenna 1 (The antenna on the right side of the rear panel).
For 802.11n mode: The router is operating in a 1T2R Spatial Multiplexing
MIMO configuration. 1 antenna is for signal transmitting and 2 antennas are
for signal receiving.
2.4GHz band, only allows 802.11b wireless network
clients to connect to this router (maximum transfer
rate 11Mbps).
2.4GHz band, only allows 802.11n wireless network
clients to connect to this router (maximum transfer
rate 300Mbps).
2.4GHz band, only allows 802.11b and 802.11g
wireless network client to connect to this router
(maximum transfer rate 11Mbps for 802.11b clients,
and maximum 54Mbps for 802.11g clients).
2.4GHz band, only allows 802.11g wireless network
clients to connect to this router (maximum transfer
rate 54Mbps).
2.4GHz band, allows 802.11b, 802.11g, and
802.11n wireless network clients to connect to this
router (maximum transfer rate 11Mbps for 802.11b
clients, maximum 54Mbps for 802.11g clients, and
maximum 300Mbps for 802.11n clients).
77