Wi-Fi Protected Setup (Wps) - Comtrend Corporation AC 1200 User Manual

2-7-5 Wi-Fi Protected Setup (WPS)

Wi-Fi Protected Setup (WPS) is the simplest way to build a connection
between wireless network clients and this wireless router. You don't
have to select the encryption mode and input a long encryption
passphrase every time when you need to setup a wireless client, you
only have to press a button on the wireless client and on this wireless
router, and the WPS will do the rest for you.
This wireless router supports two types of WPS: Push-Button
Configuration (PBC), and PIN code. If you want to use PBC, you have to
push a specific button on the wireless client to start WPS mode, and
switch this wireless router to WPS mode too. You can push the
Reset/WPS button of this wireless router, or click the 'Start PBC' button
in the web configuration interface to do this; if you want to use PIN
code, you have to know the PIN code of wireless client and switch it to
WPS mode, then provide the PIN code of the wireless client you wish to
connect to this wireless router. The detailed instructions are listed as
follows:
Click the 'Wireless' menu at the top of the web management interface,
then click 'WPS', and the following will be displayed on your web
browser:
101