Managing Power over Ethernet (PoE)
Power over Ethernet Specifications
The table below lists general specifications for Alcatel-Lucent's Power over Ethernet support. For more
detailed power supply and Power Source Equipment (PSE) specifications, refer to
Power Supplies."
IEEE Standards supported
PoE Class Detection
Default PoE administrative status
Default PoE operational status
Platforms supporting PoE
Default inline power per port
Range of inline power per port
Default PoE power per slot
Maximum PoE power per slot
Viewing Power Supply Status
To view the type and status for installed power supplies, use the
-> show powersupply
Total
Chassis/PS
Power
-----------+---------+--------+--------+-----------
1/1
920
Total
920
OmniSwitch 6860 Hardware Users Guide
PS
Type
Status
Location
AC
UP
Internal
May 2014
Power over Ethernet Specifications
Chapter 3, "Chassis and
IEEE 802.3; 802.af; 802.3at
Supported
Enabled
Disabled (PoE must be activated on a slot-by-
slot basis via the
lanpower slot service
command.)
OS6860-P24; OS6860-P48; OS6860E-P24;
OS6860E-P48
OS6860 models: 30000 milliwatts on all ports
OS6860E (Enhanced) models: 60000 milliwatts
on ports 1 through 4; 30000 milliwatts on ports
5 and higher
OS6860 models: 3000-30000 milliwatts on all
ports
OS6860E (Enhanced) models: 3000-60000
milliwatts on ports 1 through 4; 3000-30000
milliwatts on ports 5 and higher
920W power supply- 780W
600W power supply - 450W
920W power supply- 780W
600W power supply - 450W
show powersupply
command:
page 5-3