Connecting Poe Power - Alcatel-Lucent OmniSwitch 6860 Hardware User's Manual

OmniSwitch Backup Power Shelf/System (BPS)

Connecting PoE Power

1
Insert the power cord connector into the socket at the rear of the chassis.
2
Use the retainer clip to secure the power cord to the connector.
Note. The chassis does not provide an on/off switch. Connecting a minimum of one system power supply
and one PoE power supply to a power source will power on the OS-BPS chassis and any attached
switches.
OmniSwitch 6860 Hardware Users Guide May 2014
OmniSwitch BPS Power Connections
page 4-21