Alcatel-Lucent OmniSwitch 6860 Hardware User's Manual page 48

OmniSwitch 6860 Chassis Details
LED
PS
BPS
GRN
OK2 (Enhanced
models only)
Port LEDs
page 3-20
State
Solid Green
Solid Green
Solid Amber
Solid Amber
Off
Solid Green
Solid Amber
Off
Solid Green
Off
Solid Green
Blinking Green
Solid Amber
Solid Green
Blinking Green
Solid Amber
Blinking Amber
Description
Two power supplies are installed in the chassis
and both supplies are functioning normally.
One power supplies is installed in the chassis
and functioning normally (with the second
power supply bay empty or occupied by a
fan tray).
Two power supplies are installed in the chassis
and one or both supplies has experienced
a failure.
One power supply is installed in the chassis
and has experienced a failure (with the second
power supply bay empty or occupied by a
fan tray).
No power supply is present. (If the switch is
operating while the PS LED is off, the switch
is receiving power from an OmniSwitch BPS.)
Backup power supply is operating normally
Backup power supply is operating, but a fault
is present
No backup power supply is present
Power save features are active
Power save features are off
External CPU Diagnostics and AOS
bootup OK
External CPU Diagnostics in progress
External CPU Diagnostic and/or AOS
bootup failed
Valid port link (non-PoE)
Valid port link with activity (non-PoE)
Valid port link (PoE)
Valid port link with activity (PoE)
OmniSwitch 6860 Hardware Users Guide
Chassis and Power Supplies
May 2014