Getting Started
Airflow Considerations
To ensure proper airflow, be sure that your switch is placed in a well-ventilated area and provide minimum
recommended clearance at the front, back and sides of the switch.
Never obstruct chassis air vents.
Note. Clearance is not required at the top and bottom of the chassis.
Mounting the Switch
For information on mounting OmniSwitch 6860 switches, refer to the
Supplies."
OmniSwitch 6860 Hardware Users Guide
Chassis Top View
May 2014
Mounting the Switch
}
Rear. 6 inches minimum
at rear of chassis.
Sides. 2 inches minimum
at left and right sides.
}
Front. 6 inches minimum
at front of chassis.
Chapter 3, "Chassis and Power
page 2-3