Managing Power over Ethernet (PoE)
Power over Ethernet Specifications
The table below lists general specifications for Alcatel-Lucent's Power over Ethernet support. For more
detailed power supply and Power Source Equipment (PSE) specifications, refer to
"OmniSwitch 6850E Series Power Supplies."
IEEE Standards supported
PoE Class Detection
Default PoE administrative status
Default PoE operational status
Platforms supporting PoE
Default amount of inline power available for each port
Range of inline power allowed for each port
Default amount of PoE power per slot
Maximum PoE power per slot
OmniSwitch 6850E Series Hardware Users Guide
IEEE 802.3at
Supported
Enabled
Disabled (PoE must be activated on a switch-
by-switch basis via the
mand.)
PoE Models
30000 milliwatts
3000-30000 milliwatts
510W power supply - 390W
360W power supply - 240W
900W power supply - 780W
510W power supply - 390W
360W power supply - 240W
900W power supply - 780W
January 2013
Power over Ethernet Specifications
Chapter 3,
com-
lanpower start
page 5-3