Omniswitch Bps Power Connections; Connecting The Omniswitch Bps To Os6860 Switches - Alcatel-Lucent OmniSwitch 6860 Hardware User's Manual
Hide thumbs
Also See for OmniSwitch 6860:
- Troubleshooting manual (148 pages) ,
- Hardware user's manual (98 pages) ,
- Hardware user's manual (122 pages)
Table of Contents
Advertisement
OmniSwitch BPS Power Connections
OmniSwitch BPS Power Connections
Connecting the OmniSwitch BPS to OS6860 Switches
System power is provided to each OS6860 through a single one meter DB25 connector cable. Up to eight
switches may be connected to the OmniSwitch BPS chassis. To connect a switch to the
OS-BPS chassis, follow the steps below.
1
Attach one end of the cable to the DB25 connector on the rear of the OS-BPS.
2
Next, attach the other end of the cable to the DB25 connector on the rear of the switch chassis.
Note. When connecting virtual chassis to the OS-BPS, note that the switch connected to connector port
"C1" will have the highest power budget priority; the switch connected to connector port "C2" will have
the next highest priority, etc. For additional information, refer to
page 4-6
for more information.
OS6860 DB25 Connector
OmniSwitch BPS DB25 Connector
page 4-18
OmniSwitch Backup Power Shelf/System (BPS)
"OS-BPS Connector Priority" on
1 Meter Connector Cable
OmniSwitch 6860 Hardware Users Guide
May 2014
Hide quick links:
Advertisement
Table of Contents
