Managing Power over Ethernet (PoE)
Power over Ethernet Specifications
The table below lists general specifications for Power over Ethernet support. For more detailed power
supply and Power Source Equipment (PSE) specifications, refer to
Supplies."
IEEE Standards supported
PoE Class Detection
Platforms supporting PoE
Range of inline power per port
Maximum PoE power per slot
Viewing Power Supply Status
To view the type and status for installed power supplies, use the
-> show powersupply
Total
Chassis/PS
Power
-----------+---------+--------+--------+-----------
1/1
920
Total
920
OmniSwitch 6860 Hardware Users Guide
IEEE 802.3; 802.af; 802.3at, 802.3bt
Supported
OS6860-P24; OS6860-P48; OS6860E-P24; OS6860E-P48;
OS6860E-P24Z8, OS6860N-P48Z, OS6860N-P48M
OS6860 models:
- 3000-30000 milliwatts on all ports.
OS6860E (Enhanced) models:
- 3000-60000 milliwatts on ports 1 through 4.
- 3000-30000 milliwatts on ports 5 and higher.
OS6860E-P248Z8:
- 3000-30000 milliwatts on ports 1 through 16.
- 3000-75000 milliwatts on ports 17 through 24.
OS6860N-P48Z:
- 3000-60000 milliwatts on ports 1-36.
- 3000-95000 milliwatts on ports 37-48.
OS6860N-P48M:
- 3000-95000 milliwatts on ports 1-48.
OS6860N-P24Z:
- 3000-60000 milliwatts on ports 1-12.
- 3000-95000 milliwatts on ports 13-24.
OS6860N-P24M:
- 3000-95000 milliwatts on ports 1-24.
Use the show lanpower command to determine PoE power avail-
able.
PS
Type
Status
Location
AC
UP
Internal
October 2022
Power over Ethernet Specifications
Chapter 3, "Chassis and Power
show powersupply
command:
page 4-3